PSKoi - Walnut CA Pond Build

Pond build area.
User avatar
Russell Peters
Site Admin
Posts: 3036
Joined: December 11th, 2016, 9:49 am
Contact:

Re: PSKoi - Walnut CA Pond Build

Postby Russell Peters » July 24th, 2018, 6:08 pm

The second Stainless Steel shower is on the wall in front of the filter pit. I used a solid bottom and put in seven bulkheads so that it can have a water fall / fountain built around it. Once the work is complete the pipes will be cut flush with the wall and sealed. The water will pour in just above the water line but below the fountain.
Attachments
DPP_010.JPG
DPP_010.JPG (455.26 KiB) Viewed 422 times
Dealer & US Agent for INC
www.pskoi.com
https://www.facebook.com/russell.peters.984
MATSUNOSUKE GIN

Coolwon
Posts: 16
Joined: January 21st, 2017, 1:13 am

Re: PSKoi - Walnut CA Pond Build

Postby Coolwon » July 25th, 2018, 12:26 am

Those bottom cornices :-BD

Gunites the only way to go.

Garfield

User avatar
Russell Peters
Site Admin
Posts: 3036
Joined: December 11th, 2016, 9:49 am
Contact:

Re: PSKoi - Walnut CA Pond Build

Postby Russell Peters » July 25th, 2018, 12:58 pm

Day 2 - I hooked up the pumps to the SS Shower that is next to the deck. It is fed by two Periha PB25000 pumps. You can also see the sump pit, and the waste line, for the RDF's.
Attachments
DPP_003.JPG
DPP_003.JPG (402.28 KiB) Viewed 411 times
Dealer & US Agent for INC
www.pskoi.com
https://www.facebook.com/russell.peters.984
MATSUNOSUKE GIN

User avatar
Russell Peters
Site Admin
Posts: 3036
Joined: December 11th, 2016, 9:49 am
Contact:

Re: PSKoi - Walnut CA Pond Build

Postby Russell Peters » July 25th, 2018, 12:59 pm

Both RDF's were hooked up to the bottom drains and skimmers and the waste line is connected.
Attachments
DPP_008.JPG
DPP_008.JPG (414.18 KiB) Viewed 411 times
Dealer & US Agent for INC
www.pskoi.com
https://www.facebook.com/russell.peters.984
MATSUNOSUKE GIN

User avatar
Russell Peters
Site Admin
Posts: 3036
Joined: December 11th, 2016, 9:49 am
Contact:

Re: PSKoi - Walnut CA Pond Build

Postby Russell Peters » July 25th, 2018, 1:00 pm

The other RDF has three Periha PB 25000 pumps feeding the shower in front of it.
Attachments
DPP_005.JPG
DPP_005.JPG (432.85 KiB) Viewed 411 times
Dealer & US Agent for INC
www.pskoi.com
https://www.facebook.com/russell.peters.984
MATSUNOSUKE GIN

User avatar
Russell Peters
Site Admin
Posts: 3036
Joined: December 11th, 2016, 9:49 am
Contact:

Re: PSKoi - Walnut CA Pond Build

Postby Russell Peters » July 25th, 2018, 1:01 pm

The shower that is in front of the filter pit with the pipe extensions, on the bulk heads, and full of Bakki media.
Attachments
DPP_004.JPG
DPP_004.JPG (405.31 KiB) Viewed 411 times
DPP_006.JPG
DPP_006.JPG (423.92 KiB) Viewed 411 times
DPP_007.JPG
DPP_007.JPG (427.76 KiB) Viewed 411 times
Dealer & US Agent for INC
www.pskoi.com
https://www.facebook.com/russell.peters.984
MATSUNOSUKE GIN

User avatar
Russell Peters
Site Admin
Posts: 3036
Joined: December 11th, 2016, 9:49 am
Contact:

Re: PSKoi - Walnut CA Pond Build

Postby Russell Peters » July 25th, 2018, 1:02 pm

While I am doing this the guys finished the stone work on the path across the pond and started putting tile on the movie screen wall.
Attachments
DPP_001.JPG
DPP_001.JPG (511.92 KiB) Viewed 411 times
DPP_002.JPG
DPP_002.JPG (435.54 KiB) Viewed 411 times
Dealer & US Agent for INC
www.pskoi.com
https://www.facebook.com/russell.peters.984
MATSUNOSUKE GIN

User avatar
Russell Peters
Site Admin
Posts: 3036
Joined: December 11th, 2016, 9:49 am
Contact:

Re: PSKoi - Walnut CA Pond Build

Postby Russell Peters » July 25th, 2018, 1:03 pm

Day 3 - Ran the pipes to the shower and got the spray bars made up.
Attachments
DPP_001.JPG
DPP_001.JPG (466.77 KiB) Viewed 411 times
DPP_002.JPG
DPP_002.JPG (460.91 KiB) Viewed 411 times
DPP_003.JPG
DPP_003.JPG (462.32 KiB) Viewed 411 times
Dealer & US Agent for INC
www.pskoi.com
https://www.facebook.com/russell.peters.984
MATSUNOSUKE GIN

User avatar
Russell Peters
Site Admin
Posts: 3036
Joined: December 11th, 2016, 9:49 am
Contact:

Re: PSKoi - Walnut CA Pond Build

Postby Russell Peters » July 25th, 2018, 1:04 pm

I spent some time hooking up the airlines and the lines that feed the fountains in the pond. These pipes were all over the place so I tried to get them as lined up as possible. I used a separate higher pressure pump for the fountains.
Attachments
DPP_004.JPG
DPP_004.JPG (487.2 KiB) Viewed 411 times
DPP_005.JPG
DPP_005.JPG (508.42 KiB) Viewed 411 times
Dealer & US Agent for INC
www.pskoi.com
https://www.facebook.com/russell.peters.984
MATSUNOSUKE GIN

User avatar
Russell Peters
Site Admin
Posts: 3036
Joined: December 11th, 2016, 9:49 am
Contact:

Re: PSKoi - Walnut CA Pond Build

Postby Russell Peters » July 25th, 2018, 1:05 pm

Day 4 - Installed the pump controllers and the RDF controllers as well as the final piping from the pump to the fountain supply lines. The number "4" on the walls is for the electrical outlets.
Attachments
DPP_003.JPG
DPP_003.JPG (415.4 KiB) Viewed 411 times
DPP_004.JPG
DPP_004.JPG (459.67 KiB) Viewed 411 times
DPP_005.JPG
DPP_005.JPG (464.79 KiB) Viewed 411 times
Dealer & US Agent for INC
www.pskoi.com
https://www.facebook.com/russell.peters.984
MATSUNOSUKE GIN


Return to “Pond Construction and Filtration”

Who is online

Users browsing this forum: No registered users and 1 guest